Classic Bronco Fender Emblem Badge with Model Name (Sold as a Pair)

!!!PLEASE READ!!!
SQUARE MODEL ONLY FIT TO OUR PRODUCT CLASSIC BRONCO 3D RAISED EMBLEM ONLY, DON'T WORK WITH OTHER LETTERS SUPPLIER.
For this letters without model name CLICK HERE:
Classic Bronco Fender Emblem. (Sold as a Pair)
Letters and Design will be Black Matte only the Inside Square Color will change.
and the square it is a separate from the letters and install after the main letters was installed.

1- You don't have to buy a separate glue or tape to install, you are saving $8-10
2- Best Quality, our is made with Polymer material the same of our badges vs other sellers offer 3D printing which is not best quality.
3- Very important (UV Resistant and for outdoor environment).
4- Ship in a box with bubble wrap to protect and not in an envelope like other sellers.
5- FREE Shipping USPS Ground Advantage with tracking number.

- Made In USA
- IT IS NOT METAL
- Laser cut UV resistant Polymer/Acrylic
- Size: 9.60" x 2.60" and 1/8″ thicker.
- 3M double side super sticky tape on the back for easy installation (Peal & Stick).
- Contact Us if you want different color to see if is available.
- Car Wash Safe.

WARNING!!!
-Needs to be handled with care as it can break if bent or pressed with too much pressure.
-Please handle with care and clean only with soap, water and with a clean microfiber cloth.

IMPORTANT NOTE ON INSTALLATION AND REMOVAL OF EMBLEMS:
Installing or removing emblems is done at your own risk to the emblem, vehicle, tools, yourself and/or others. We are not responsible for any damage to your vehicle, emblems or any injury that may be incurred.

CERAMIC COAT TREATMENT please ask the person or company who did the job and ask how to remove the ceramic coat only in the area you want to install this item. We are not responsible for any emblem lost if your vehicle have Ceramic Coat Treatment before install emblems.

Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.

Easy to Install
Remove gentle form the package.
1- Don’t install outside with extreme freezing temperatures, find an indoor, garage area to do the installation.
2- Remove if any existing emblems and badges that are in your way.
3- Clean the surface with a clean rag and alcohol and then completely dry the area (It needs to be completely dry or the tape won’t stick..
4- Apply a heat for a few seconds to the area with a hair dryer to keep warm if surface is a little cold. (Optional)
5- Peel off the backing paper that protects the adhesive on the badge.
6- Centralize in the area where be apply.
7- After install press badge onto the surface and apply equal and firm pressure for at least 30 seconds then remove the top protection paper.
8- Wait couple of days before wash the vehicle in that area.

FEEDBACK and CUSTOMER SERVICE 100% satisfaction is our highest priority and our feedback rating shows it!
ACKNOWLEDGEMENT: By purchasing these decals you acknowledge that you have read the entire item description and understand what you are buying.
If you have any questions regarding these decals please contact us prior to purchasing.

Notice of Non-Affiliation and Disclaimer:

We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with FORD MOTOR COMPANY, or any of its subsidiaries or its affiliates.
The name FORD BRONCO as well as related names, marks, emblems and images are registered trademarks of their respective owners, including FORD MOTOR COMPANY
Throughout this website and catalog the terms: Ford®, Raptor®, Bronco, Bronco Sport, Big Bend, Outer Banks, Badlands, Wildtrak, First Edition, Everglades, Black Edition are used for identification purposes only.

Materials: IT IS NOT METAL,is UV resistant polymer,UV Acrylic,For Outdoor Use